Electric Kit
Regular price $599.00The Revel Kit is a direct drive bolt-on electric skateboard, designed from the ground up for unparalleled versatility, massive performance, and using premium parts and materials.
It works with a variety of standard longboard wheels, and it can be installed on most decks with just 4 screws like a standard skateboard truck.
The kit is available with two battery options:
Standard range battery (144wh/4000mAh)
Extended range battery (216wh/6000mAh)
Revel remote can be paired to two kits simultaneously, for a 4WD riding experience.
- Direct drive bolt-on electric skateboard
- Fast install on most decks
- Everything included (except a deck!)
- Swappable batteries
- 4WD ready remote control
KIT SPECS
- Top Speed 28 Mph / 45 Kmh
- Standard Range Battery 6-10 Miles / 10-16 Km
- 144WH / 4000mAh
- Extended Range Battery 10-15 Miles / 16-24 Km
- 216WH / 6000mAh
- Max Grade: 20%
- Charge Time 120-180 Minutes
- Drive Weight 11 Lbs / 5 Kg
- Standard Wheels 90mm
- Truck Width 11" / 280 mm
- Throttle Control Linear
- Max Rider Capacity Tested to 264 Lbs / 120 Kg
- Motors 1100W Dual Brushless Motors
- IP Rating Water & Dust Resistant (IP 54)
- Braking Regenerative Braking
- Remote Connection Bluetooth Low-Energy
- Operating Temp 32 to 104 °F / 0 to 40 °C
30" WHEEL CUT
The deck is perfect for pushing around parking lots and navigating a crowded sidewalk. Small and portable. Easier for smaller riders to carry around. Less flex than a larger board.
RIDER PROFILE
Typically smaller kids learning to ride, however experienced larger riders with good balance will ride a 30". Good balance required for larger riders. Typically a rider that is 120lbs or less.
DECK
Standard 3/4" thick acrylic for riders up to 220lbs, 1" thickness upgrade available for riders over 220lbs and up to 340lbs Choice of over 50 preset designs or ability to customize.
TRUCKS & WHEELS
180 mm / 50 Degree Reverse King Pin Trucks with standard top mount. Rolling on your choice of wheels - Light Up, Solid, or Sharks; all equipped with ABEC 7 bearings.
SPECS
Length: 30"
Width: 8" at widest point
Wheel Base:
36" SURFER
Super cool and unique deck with an aggressive stance that will pull on the heart strings of any surfer. Available in the surfer board design only.
RIDER PROFILE
Good balance required. Experienced riders will love the look and feel. More difficult board to learn to ride on. Great for cruising and carving.
DECK
Standard 3/4" thick acrylic for riders up to 220lbs, 1" thickness upgrade available for riders over 220lbs and up to 340lbs.
Choice of over 50 preset designs or ability to customize.
TRUCKS & WHEELS
180 mm / 50 Degree Reverse King Pin Trucks with standard top. Rolling on your choice of wheels - Light-Up, Solid, or Shark with ABEC 7 bearings
SPECS
Length: 36"
Width: 8.25" at widest point
Wheel Base: 22"
40" WHEEL CUT
Great all around size. Good for riders of all skill level. Good for carving and cruising. Bigger board but still easy to carry.
RIDER PROFILE
Perfect if you love long boards, want to carve, and are great at riding. Any age with a little experience.
DECK
Standard 3/4" thick acrylic for riders up to 220lbs, 1" thickness upgrade available for riders over 220lbs and up to 340lbs.
Choice of over 50 preset designs or ability to customize.
TRUCKS & WHEELS
180 mm / 50 Degree Reverse King Pin Trucks with standard top. Rolling on your choice of wheels - Light-Up, Solid, or Shark with ABEC 7 bearings
SPECS
Length: 40"
Width: 8" at widest point
Wheel Base: 27"
40" PLATYPUS
Great all-round deck. Good for any skill level with its wide deck and platypus design - no front or back - they are the same. Great for cruising or carving. Most popular deck.
RIDER PROFILE
You are a beginner, or just love a great board for anything. It is the widest board, so it is the easiest to ride, and the front and back look the same, so no worries what is the front and back. Great for any age or skill level. Best for learning and for the expert - OUR PERSONAL FAVORITE!
DECK
Standard 3/4" thick acrylic for riders up to 220lbs, 1" thickness upgrade available for riders over 220lbs and up to 340lbs.
Choice of over 50 preset designs or ability to customize.
TRUCKS & WHEELS
180 mm / 50 Degree Reverse King Pin Trucks with standard top. Rolling on your choice of wheels - Light-Up, Solid, or Shark with ABEC 7 bearings
SPECS
Length: 40"
Width: 9" at widest point
Wheel Base: 31"
34" PLATYPUS DROP THROUGH
Our board of choice. Lower to the ground due to drop through mounting of the trucks. Makes it more responsive, easier to balance, and less distance from deck to ground makes pushing easier. Excellent cruiser and carver.
RIDER PROFILE
Good for all ages and all experience levels. The go to board for anyone. Older riders will like the wide base and younger riders will like the responsiveness and feel. Lower to the ground for better balance. You like speed? Then you'll love this deck.
DECK
Standard 3/4" thick acrylic for riders up to 220lbs, 1" thickness upgrade available for riders over 220lbs and up to 340lbs.
Choice of over 50 preset designs or ability to customize.
TRUCKS & WHEELS
180 mm / 50 Degree Reverse King Pin Trucks with drop through mounting (trucks both on top and below the deck). Rolling on your choice of wheels - Light-Up, Solid, or Shark with ABEC 7 bearings
SPECS
Length: 40"
Width: 9" at widest point
Wheel Base:
48" PINTAIL
The ultimate cruising board. Easy to control. Not made for carving, just long and straight rides.
RIDER PROFILE
Beginner, or just love a great board for anything. Super Long, great cruiser. Not made for carving, just long and straight rides Any age but the size may be prohibitive for smaller riders to carry. Good board to learn on, compensates for learning balance challenges.
DECK
Standard 3/4" thick acrylic for riders up to 220lbs, 1" thickness upgrade available for riders over 220lbs and up to 340lbs.
Choice of over 50 preset designs or ability to customize.
TRUCKS & WHEELS
180 mm / 50 Degree Reverse King Pin Trucks with standard top. Rolling on your choice of wheels - Light-Up, Solid, or Shark with ABEC 7 bearings
SPECS
Length: 48"
Width: 9" at widest point
Wheel Base: 33"
48" DANCER
The Dancer is a unique longboard that allows the rider the space to move and dance while rolling. It's a great board for self expression. Wide deck and long wheel base.
RIDING PROFILE
This is a big board. Not one that you want to carry around all day. Perfect for those that like to "dance" on their board while riding. Also a good cruiser due to its size. If looking for someone 12 and under consider the size.
DECK
Standard 3/4" thick acrylic for riders up to 220lbs, 1" thickness upgrade available for riders over 220lbs and up to 340lbs Choice of over 50 preset designs or ability to customize.
TRUCKS & WHEELS
180 mm / 50 Degree Reverse King Pin Trucks with standard top. Rolling on your choice of wheels - Light-Up, Solid, or Shark with ABEC 7 bearings
SPECS
Length: 48"
Width:
Wheel Base:
1. Every couple of weeks check the bolts on your trucks and wheels. Tighten if needed. Don’t overtighten just make sure things aren’t loose
2. Follow the Novus 3-step regimen to keep your board clean and in great condition
How to use Novus:
Step 1: For general cleaning apply #1 liberally to a microfiber towel and wipe down the board
Step 2: For light scratches apply dime sized amount of #2 directly to a buffing pad (either Step 3: For heavy scratches apply dime sized amount of #3 directly to a buffing pad (either hand or powered), work back and forth across the board evenly. Wipe clean. Then, apply dime sized amount of #2 directly to a buffing pad (either hand or powered), work back and forth across the board evenly. Finally, wipe and clean with #1.
3. Invest in a bumper to protect from curbs and other solid objects. All boards (wood or acrylic will chip or scratch when slammed into a curb), so protecting the front (all wheel cut and pintail boards) and front/back (all platypus boards) is a cheap but effective solution to keep your board looking great
4. Store your board in a safe place when not in use, a board rack is a great option. It will keep your board from getting runover accidentally or someone tripping and falling over it
General
Great question and one that we get often. Take a look at the graphic below and then review "What is the right size board for me?" question to get a feel for what is the best option for you!
This depends on a few things: age, weight, height, balance and skill. Below are some guidelines to consider.
30" Wheel Cut Board
Usually smaller kids will ride these. easy to carry, and not taller then you! We see more young kids ride this board.
BUY IF:
- 5-21 years old and weigh under 120lbs
- You want something to start with, but has good balance
DON'T BUY IF:
- Don't have good balance
- Older then 25
- Taller then 5'8"
40" Wheel Cut Board
Great all around size. Looks and feels like a long board.
BUY IF:
- You love long boards, want to carve, and great at riding.
- Ages: any
- Height: any
- Balance: must have a little experience
DON'T BUY IF:
- Don't have good balance
- Beginner and over 13 yrs old
40" Platypus / Platypus Drop Through
Good for all ages, all sizes, all experience. The go to board for anyone - make it the ultimate board with the drop through. It will be lower to the ground, offer better balance, and made for speed.
BUY IF:
- You are a beginner, or just love a great board for anything. It is the widest board, so it is the easiest to ride, and the front and back look the same, so no worries what is the front and back
- Ages: Any
- Height: Any
- Balance: Best for learning and for the expert - OUR PERSONAL FAVORITE!
DON'T BUY IF:
No reasons at all!
48" Pintail
Good for all ages, but it is heavy and super long. Young kids need to make sure they know what they are getting - it weighs 12lbs. It's heavy.
BUY IF:
- You are beginner, or just love a great board for anything. Super Long, great cruiser. Not made for carving, just long and straight rides
- Ages: Any, but be careful with the height and weight of the board with little kids
- Height: Any
- Balance: Super easy to ride - weight limit 220 lbs
DON'T BUY IF:
- Not strong
- Want to carry your board...EVER
- Like to carve
No. They are not slippery, and you do not need grip tape.
Acrylic / Plexiglass .75 inch thick. Big Boy: 1 inch thick
We make them in Cedar Hills, Utah and ship worldwide.
No, they do not break easy. We are aware of 13 that have broke out of 15,000 sold, and we replaced 9 of them for free. We want everyone to enjoy them and have fun. Scratches: They can scratch. We are working on a harder material that we hope to release in a few months.